China Seamless tube and seamless pipes manufacturer & supplier

ASTM A213 T5b Seamless alloy tube

ASTM A213 T5b Standard covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.

2016-12-06

Socket Welding Tees and Forged High Pressure Pipe Fittings

1. Threaded wog: 2000, 3000 and 6000 lbs (140kgs/cm2-210kgs/cm2-410kgs/cm2)( sch 40 - sch 80 - sch 160 ).
2. Socket-welding wog: 3000, 6000, 9000 lbs

2016-11-09

Gray Iron Casting Service and Ductile Iron Casting Service

Our prefessional foundry can do sand casting,lost wax casting and die casting.

2016-11-09

Nipple Coupling or Full Coupling fittings

Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided with a swaged-on adapter carrying the

2016-12-12

Forged Elbow and Elbow Fittings

Forged elbow Threaded Pipe Fitting SS304 with 90 degrees Elbow, Class 150lb, Male and Female Thread.

2016-11-09

stainless steel flange and Stainless flanges

We Offer Stainless Steel Parts Stainless Steel machined parts turned Parts Cast Parts Stainless Steel Forged Parts Stainless Steel Fittings SS Stainle

2016-11-09

Forged Flange and Forged steel flanges

Forged flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate t

2016-11-09

Welding Neck Flanges and NW Long Weld Neck Flanges

The Welding neck flanges is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress

2016-11-09

Threaded Flanges and TH Flanges

Threaded (Screwed) flange is similar to the Slip-On flange, but the bore is threaded. Its chief merit is that it can be assembled withour welding, exp

2016-11-09

Slip-On Flangesand SO Flange

The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide suffcient streng

2016-11-09

Socket Welding Flanges and SW Flange

The socket welding flange is similar to a slip-on flange except it has a bore and a counterbore dimension. The counterbore is slightly larger than the

2016-11-09

Ring Type Joint Flange

Ring Type Joint Flange is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on t

2016-12-12

RTJ Flanges and Ring Type Joint Flange

Ring Type Joint Flange is a method of ensuring leak proof flange connection at high pressures.

2016-11-09

Reducing flange and Reducing Flange

A reducing flange consists of a flange with one specified diameter having a bore of a different and smaller, diameter. Except for the bore and hub dim

2016-11-09

steel orifice flanges and orifice flanges manufacturers

steel orifice flanges, orifice flanges manufacturers

2016-11-09

Lap Joint Flanges and Stub End Lap Joint Flanges

The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. This radius

2016-11-09